AVR220 harman/kardon
Rear Panel Connections
! Tape Inputs: Connect these jacks to the¤ Video Monitor Outputs: Connect thisb Video 2 Video Outputs: Connect these
PLAY/OUT jacks of an audio recorder.jack to the composite or S-Video input of a TVjacks to the RECORD/INPUT composite or
monitor or video projector to view the on-screenS-Video jacks on a VCR, if you are connecting a
" Tape Outputs: Connect these jacks to themenus and the output of any standard videoVCR to the Video 2 inputs.
RECORD/INPUT jacks of an audio recorder.source selected by the receiverOs video switcher.
c Video 3 Video Inputs: Connect these
L Video 1 Audio Inputs: Connect these9 Subwoofer Output: Connect this jack tojacks to the PLAY/OUT composite or S-Video
jacks to the PLAY/OUT audio jacks on a VCRthe line-level input of a powered subwoofer. Ifjacks on a cable television box, satellite dish
or other video source.an external subwoofer amplifier is used, con-receiver, VCR or other video source.
nect this jack to the subwoofer amplifier input.
c AM Antenna: Connect the AM loop antennad Video 2 Video Inputs: Connect these
supplied with the receiver to these terminals. If an: Front Speaker Outputs: Connect thesejacks to the PLAY/OUT composite or S-Video
external AM antenna is used, make connectionsoutputs to the matching + or � terminals onjacks on a TV, VCR or other video source.
to the AM and GND terminals in accordanceyour front speakers. When making speaker
with the instructions supplied with the antenna.connections, always make certain to maintaine Optical Digital Inputs: Connect the opti-
correct polarity by connecting the red (+) termi-cal digital output from a DVD player, HDTV
Video 1 Audio Outputs: Connect thesereceiver, LD player, satellite receiver, cable box,
nals on the AVR 220 to the red (+) terminals on
jacks to the RECORD/INPUT audio jacks on
the speaker and the black (�) terminals on theMiniDisc player or recorder, or CD player to
a VCR.
AVR 220 to the black (�) terminals on thethese jacks. The signal may be either a Dolby
speakers. (See page 14 for more information onDigital signal, a DTS signal or a standard PCM
§ DVD Audio Inputs: Connect these jacks
speaker polarity.)digital source.
to the analog audio jacks on a DVD or other
video source.f Coaxial Digital Inputs: Connect the coax
Surround Speaker Outputs: Connect
NOTE: The default setting for the audio inputthese outputs to the matching + or � terminalsdigital output from a DVD player, HDTV receiver,
on your left and right surround speakers. WhenLD player, satellite receiver, cable box, MiniDisc
associated with DVD is the Coaxial Digital
making speaker connections always make cer-recorder or CD player to these jacks.The signal
Input 1 f. If you connect the audio outputs
of a DVD player to these jacks, change thetain to maintain correct polarity by connectingmay be either a Dolby Digital signal, DTS signal
the red (+) terminals on the AVR 220 to the redor a standard PCM digital source. Do not con-
input setting as shown on page 18.
(+) terminals on the speakers and the black (�)nect the RF digital output of an LD player to
these jacks.
? FM Antenna: Connect the supplied indoor orterminals on the AVR 220 to the black (�) ter-
an optional external FM antenna to this terminal.minals on the speakers. (See page 14 for more
information on speaker polarity.)g Video 2 Audio Outputs: Connect these
jacks to the RECORD/INPUT audio jacks on a
" CD Inputs: Connect these jacks to the out-
put of a compact disc player or CD changer. Switched AC Accessory Outlet: This VCR or other video source, if you have connect-
outlet may be used to power any device youed a VCR to the Video 2 input.
a 6-Channel Direct Inputs: If an externalwish to have turned on when the AVR 220 is
digital audio decoder is used, connect the out-turned on with the System Power Controlh Video 3 Audio Inputs: Connect these
jacks to the PLAY/OUT audio jacks on a cable
puts of that decoder to these jacks.Switch 2.
television box, satellite dish receiver, VCR or
These jacks have been color-coded as follows to! Unswitched AC Accessory Outlet: Thisother video source.
asssit you in making correct channel connec-outlet may be used to power any AC device.
tions:The power will remain on at this outlet regard-i Video 2 Audio Inputs: Connect these
jacks to the PLAY/OUT audio jacks on a VCR
Front LeftWhiteless of whether the AVR 220 is on or off.
or other video source, if you have connected a
Front RightRed
CenterGreenNOTE: The total power consumption of allVCR to the Video 2 input.
Surround LeftBluedevices connected to the accessory outlets
Surround RightGrayshould not exceed 100 watts.
SubwooferPurple
° AC Power Cord: Connect the AC plug to
Digital Audio Outputs: Connect thesean unswitched AC wall output.
jacks to the matching digital input connector
? Video 1 Video Outputs: Connect these
on a digital recorder such as a CD-R or
jacks to the RECORD/INPUT composite or
MiniDisc recorder.
S-Video jack on a VCR.
D DVD Video Inputs: Connect these jacks to
the composite or S-Video output jacks on aa Video 1 Video Inputs: Connect these
jacks to the PLAY/OUT composite or S-Video
DVD or other video source.
jacks on a VCR or other video source.
10 REAR PANEL CONNECTIONS |